The main difference between the horizontal lathe and the saddle lathe is that the saddle lathe has a detachable saddle bed that expands the range of machining diameters and is well suited for the machining of disc parts and deformed parts.
It has fixed center spindle along with that standard accessories of full length splash guard. There are different Admit Between Center according to the different E series model and so the swing over bed varies respectively.
The CW-E series of lathe machine can handle a variety of turning work, mainly used for turning internal and external cylindrical surfaces, conical surfaces and other parts with rotating surfaces. Turning end faces, grooving, cutting, drilling and turning all kinds of commonly used metric, inch, modulus and pitch threads.
Turning end faces and turning a variety of inch threads, metric threads, modulus and pitch threads.
Max. Swing over bed630mm800mm1000mm
Max. swing over carriage
Gap length (from spindle nose)
Max workpiece length1000/ 1500/ 2000/ 3000/ 4000/ 5000/ 6000/ 8000mm
Max turning lengthHorizontal lathe 850/ 1350/ 1850/ 2850/ 3850/ 4850/ 5850/ 7850mm
Saddle lathe 600/ 1100/ 1600/ 2600/ 3600/ 4600/ 5600/ 7600mm
Distance center from spindle to bed 315mm400mm515mm
Max. Swing cross slide350mm480mm710mm
Spindle bore diameter100mm/105mm/130mm
Spindle bore front taperMetric 120mm
Spindle speed range7.5-1000r/min
Max. torque of spindle2400Nm
Center sleeve diameter100mm
Max. travel of the center sleeve240mm
Tool section30x30 mm
Swing angel of toolpost±90°
Max horizontal travel of the cross slide460 mm470mm530mm
Max travel of the upper toolpost200 mm（8"）
◆ Spindle head
The spindle head of the machine is available in C11 and D11 versions.
Normally, a C11 spindle is provided. D11 spindles are available for both inch and special order machines.
◆ Main motor power
The main motor of this series has a power of 11kW (special order is 15kW).
◆ Spindle structure with multiple spindle apertures
This series of machine tools can provide a variety of spindle aperture spindle structure, the spindle aperture is 100mm, 105mm, 130mm three.
◆ Structure of the slipper box
The slide box of the machine tool is equipped with a fast moving device, an overload safety device, and a vertical and horizontal cross handle handle opening and closing nut handle.
◆ Lubrication system
The headstock and feed box of the machine tool are lubricated by oil pump shower.
◆ Noise test
According to GB/T16769-2008 "Metal Cutting Machine Noise Acoustic Pressure Level Measurement Method" test, the noise pressure level of this machine tool is ≤83dB(A).
Packing & ShippingLathe Machine for sale